How do you insulate a garage door?
Q. I have an uninsulated garage door and was wondering if there is anyway to insulate it. As in taping insulation to it? It isn't one that can come apart. If I can't insulate it, any other ideas would be great!
Asked by Tony V - Mon Nov 20 20:35:57 2006 - - 6 Answers - 0 Comments
A. You might explore the use of styrofoam sheets (1/4 inch thick)
Answered by B - Mon Nov 20 20:42:37 2006
Q. I have an uninsulated garage door and was wondering if there is anyway to insulate it. As in taping insulation to it? It isn't one that can come apart. If I can't insulate it, any other ideas would be great!
Asked by Tony V - Mon Nov 20 20:35:57 2006 - - 6 Answers - 0 Comments
A. You might explore the use of styrofoam sheets (1/4 inch thick)
Answered by B - Mon Nov 20 20:42:37 2006
should insulate the cold water pipes in my basement for winter?
Q. i have insulated the hot water pipes for the winter but do i insulate cold water pipes? if i do will that actually stop warm air from hitting the pipes? should i insulate the nearest pipe leading to the outside water spigot?
Asked by Kimberly T - Wed Nov 7 18:47:52 2007 - - 9 Answers - 0 Comments
A. cold water lines are generally insulated to keep condensation from forming on the lines, not so much for a freeze/no freeze reason if your climate has humid summers, then it would be a good idea to insulate. Condensation can cause as much of a problem as a drippy pipe.
Answered by TnA Inc. - Wed Nov 7 20:31:28 2007
Q. i have insulated the hot water pipes for the winter but do i insulate cold water pipes? if i do will that actually stop warm air from hitting the pipes? should i insulate the nearest pipe leading to the outside water spigot?
Asked by Kimberly T - Wed Nov 7 18:47:52 2007 - - 9 Answers - 0 Comments
A. cold water lines are generally insulated to keep condensation from forming on the lines, not so much for a freeze/no freeze reason if your climate has humid summers, then it would be a good idea to insulate. Condensation can cause as much of a problem as a drippy pipe.
Answered by TnA Inc. - Wed Nov 7 20:31:28 2007
How can I better insulate my coffee mug?
Q. I have a Starbucks Coffee mug (the kind where you insert your own design) and I want to keep cold drinks cold as well as hot drinks hot. I thought I had purchased a double insulated mug. But there was condensation on the outside when I poured in a cold drink. I'm not sure if it will keep my coffee hot either. Is there anything I can do to further insulate it. In short how do I keep drink drink?
Asked by Mizue - Tue Jun 10 18:06:29 2008 - - 1 Answers - 0 Comments
A. For hot pour boiling water into it prior to the hot drink. For cold, keep it in the freezer.
Answered by djaca70 - Tue Jun 10 18:29:20 2008
Q. I have a Starbucks Coffee mug (the kind where you insert your own design) and I want to keep cold drinks cold as well as hot drinks hot. I thought I had purchased a double insulated mug. But there was condensation on the outside when I poured in a cold drink. I'm not sure if it will keep my coffee hot either. Is there anything I can do to further insulate it. In short how do I keep drink drink?
Asked by Mizue - Tue Jun 10 18:06:29 2008 - - 1 Answers - 0 Comments
A. For hot pour boiling water into it prior to the hot drink. For cold, keep it in the freezer.
Answered by djaca70 - Tue Jun 10 18:29:20 2008
How to insulate a window in a baby's room?
Q. I am currently renting. The place that we have has single pane windows. We currently have those really heavy curtains for more insulation but they are extremely ugly. Now we are expecting a baby and I want to take the curtains down but I need to know how to insulate the windows. I see those kits you shrink with a hair dryer but I just want to do the best thing possible. Can anyone help?!
Asked by unknown - Thu Jun 12 10:38:23 2008 - - 3 Answers - 0 Comments
A. I saw one of those DIY shows the other night about insulating windows and they used simple contact paper. The stuff that you put on books. They got the clear paper and stuck it on. You could not see it and and they said it worked wonders.
Answered by Bubs Mom - Mon Jun 16 06:30:01 2008
Q. I am currently renting. The place that we have has single pane windows. We currently have those really heavy curtains for more insulation but they are extremely ugly. Now we are expecting a baby and I want to take the curtains down but I need to know how to insulate the windows. I see those kits you shrink with a hair dryer but I just want to do the best thing possible. Can anyone help?!
Asked by unknown - Thu Jun 12 10:38:23 2008 - - 3 Answers - 0 Comments
A. I saw one of those DIY shows the other night about insulating windows and they used simple contact paper. The stuff that you put on books. They got the clear paper and stuck it on. You could not see it and and they said it worked wonders.
Answered by Bubs Mom - Mon Jun 16 06:30:01 2008
How do I insulate the roof of metal canopy double carport to get rid of condensation?
Q. The bottom of the metal roof of my canopy carport has condensation on it in the mornings. How can I insulate the bottom side. A friend recommened to use close cell foam insulation that is sprayed on but it is expensive.
Asked by PC 20-04 - Mon Nov 6 01:26:30 2006 - - 6 Answers - 0 Comments
A. it maybe expenisve but will insulate well and not allow condidsation from rotting it out. better to do it once and do it right first time round
Answered by optionnumber8 - Mon Nov 6 01:36:00 2006
Q. The bottom of the metal roof of my canopy carport has condensation on it in the mornings. How can I insulate the bottom side. A friend recommened to use close cell foam insulation that is sprayed on but it is expensive.
Asked by PC 20-04 - Mon Nov 6 01:26:30 2006 - - 6 Answers - 0 Comments
A. it maybe expenisve but will insulate well and not allow condidsation from rotting it out. better to do it once and do it right first time round
Answered by optionnumber8 - Mon Nov 6 01:36:00 2006
What is the cheapest way to insulate the walls of a 100 year old house without destroying the siding or walls?
Q. I would like to insulate but we are on a tight budget. I really do not want to mess up the siding or the walls inside too much. I heat with wood and gas and electricity. depending on costs. I replaced most of the windows with new vinyl insulated windows. I really want to cut heating costs even more. Any suggestions?
Asked by Ray W - Sun Sep 17 16:06:03 2006 - - 4 Answers - 0 Comments
A. Blow in insulation is pretty good and is a good buy too. Also, put batt insulation under the floor and possibly in the attic if there is room ...othewise blow in. I have had this done and have been quite pleased both with the insulation as well as with sound reduction. Blow in they have to drillholes in the stud bays so be prepared for that as it compromises the house integrity but it seals up nicely in the end. Do all this BEFORE you paint the house is best.
Answered by JuanCarlosNoMore - Sun Sep 17 18:34:06 2006
Q. I would like to insulate but we are on a tight budget. I really do not want to mess up the siding or the walls inside too much. I heat with wood and gas and electricity. depending on costs. I replaced most of the windows with new vinyl insulated windows. I really want to cut heating costs even more. Any suggestions?
Asked by Ray W - Sun Sep 17 16:06:03 2006 - - 4 Answers - 0 Comments
A. Blow in insulation is pretty good and is a good buy too. Also, put batt insulation under the floor and possibly in the attic if there is room ...othewise blow in. I have had this done and have been quite pleased both with the insulation as well as with sound reduction. Blow in they have to drillholes in the stud bays so be prepared for that as it compromises the house integrity but it seals up nicely in the end. Do all this BEFORE you paint the house is best.
Answered by JuanCarlosNoMore - Sun Sep 17 18:34:06 2006
How to insulate walls by baseboard?
Q. I can feel cold air coming in between the floor and wall. I removed the baseboard to install a new floor. Is there a way to insulate here? Also the walls themselves are thin, is there a cheap way to better insulate them? I live in Canada.
Asked by Data Detective - Tue Jan 8 10:23:05 2008 - - 3 Answers - 0 Comments
A. foam in a spray would be better as fibre glass is not permeable against air penetration,but the best way would to caulk the gap at the bottom of the baseboard
Answered by kyal_taylah - Tue Jan 8 10:46:34 2008
Q. I can feel cold air coming in between the floor and wall. I removed the baseboard to install a new floor. Is there a way to insulate here? Also the walls themselves are thin, is there a cheap way to better insulate them? I live in Canada.
Asked by Data Detective - Tue Jan 8 10:23:05 2008 - - 3 Answers - 0 Comments
A. foam in a spray would be better as fibre glass is not permeable against air penetration,but the best way would to caulk the gap at the bottom of the baseboard
Answered by kyal_taylah - Tue Jan 8 10:46:34 2008
should i insulate any of the furnace duct work?
Q. i have insulated my water pipes and water heater. should i insulate any of the furnace duct work?
Asked by m t - Sat Oct 20 20:01:02 2007 - - 6 Answers - 0 Comments
A. if the duct work has been internally insulated, then no, that is if it is a/c&heating. If there is no insulation inside of the duck work, then yes you should insulate it. if it is just heating duct work, then no.
Answered by Cindi H - Sat Oct 20 21:04:41 2007
Q. i have insulated my water pipes and water heater. should i insulate any of the furnace duct work?
Asked by m t - Sat Oct 20 20:01:02 2007 - - 6 Answers - 0 Comments
A. if the duct work has been internally insulated, then no, that is if it is a/c&heating. If there is no insulation inside of the duck work, then yes you should insulate it. if it is just heating duct work, then no.
Answered by Cindi H - Sat Oct 20 21:04:41 2007
What is correct way to insulate walk-in attic?
Q. I need to insulate the roof joists of my walk-in attic (3rd story) in my Michigan home. There are no roof vents. I am going to use faced fiberglass roll in insulation. Do I need to leave air space between the insulation and roof boards? I have heard about leaving air flow space, but there are no vents in roof or eaves. Obviously, I do not want future moisture problems up there.
Asked by rcredsfan - Tue Jan 1 08:20:09 2008 - - 3 Answers - 0 Comments
A. if there isn,t a vent just staple it to the joist,s use paper faced
Answered by William B - Tue Jan 1 08:29:40 2008
Q. I need to insulate the roof joists of my walk-in attic (3rd story) in my Michigan home. There are no roof vents. I am going to use faced fiberglass roll in insulation. Do I need to leave air space between the insulation and roof boards? I have heard about leaving air flow space, but there are no vents in roof or eaves. Obviously, I do not want future moisture problems up there.
Asked by rcredsfan - Tue Jan 1 08:20:09 2008 - - 3 Answers - 0 Comments
A. if there isn,t a vent just staple it to the joist,s use paper faced
Answered by William B - Tue Jan 1 08:29:40 2008
How do I insulate an attic-bedroom conversion?
Q. I've got a house with an attic conversion that was done before I moved in. So far I've been using it as storage, but after living here a year I know that the attic room is an icebox in winter and a sauna in the summer, regardless of the temperature of the rest of the house. I take this to mean that the attic is not insulated properly? The conversion looks like an amateur job and it doesn't look like it was finished before the house was up for sale. What do I need to buy and do to insulate the attic properly? What kind of insulation do I need? What it looks like I've got is the actual sloped roof itself, with plasterboard panels nailed to the beams, creating a cavity. In the cavity is what looks like plain old polystyrene. Yes, that's… [cont.]
Asked by reddragon105 - Sat Dec 23 22:14:33 2006 - - 10 Answers - 0 Comments
A. if you want it done right,strip off the celing boards.pull down the strene,throw it away.go to lowe's,home depot.ect.purchase the wafer panels for celing use.thease are panels that are set up to allow air to flow on roof side.they have a channel built in to them.and a staple adge on both sides.they go up easy.from the wall ends to the peak and overlap.they fit between the roof boards.then you can put up your good old r 38 roll insul.staple this up too.comes in widths of 16 and 24 inches.just measure.then replace your celing board,mud ,tape,paint.done.it sounds like alot of work ,but isnt.just takes time.but thease places all have weekend how to clinics,and really good people to answer your questions.and this way should save you some money… [cont.]
Answered by vance w - Sun Dec 24 00:57:46 2006
Q. I've got a house with an attic conversion that was done before I moved in. So far I've been using it as storage, but after living here a year I know that the attic room is an icebox in winter and a sauna in the summer, regardless of the temperature of the rest of the house. I take this to mean that the attic is not insulated properly? The conversion looks like an amateur job and it doesn't look like it was finished before the house was up for sale. What do I need to buy and do to insulate the attic properly? What kind of insulation do I need? What it looks like I've got is the actual sloped roof itself, with plasterboard panels nailed to the beams, creating a cavity. In the cavity is what looks like plain old polystyrene. Yes, that's… [cont.]
Asked by reddragon105 - Sat Dec 23 22:14:33 2006 - - 10 Answers - 0 Comments
A. if you want it done right,strip off the celing boards.pull down the strene,throw it away.go to lowe's,home depot.ect.purchase the wafer panels for celing use.thease are panels that are set up to allow air to flow on roof side.they have a channel built in to them.and a staple adge on both sides.they go up easy.from the wall ends to the peak and overlap.they fit between the roof boards.then you can put up your good old r 38 roll insul.staple this up too.comes in widths of 16 and 24 inches.just measure.then replace your celing board,mud ,tape,paint.done.it sounds like alot of work ,but isnt.just takes time.but thease places all have weekend how to clinics,and really good people to answer your questions.and this way should save you some money… [cont.]
Answered by vance w - Sun Dec 24 00:57:46 2006
How can I insulate ceilings without major construction?
Q. I have recently found out that there is no insulation between our first and second floors in my house. Upstairs is always pretty warm but we didn't find out until we heard mice scurrying and had the exterminator in and he told us the area wasn't insulated. With the winter coming, and having oil heat I would like to keep some of the heat on the first floor. Is there any way to insulate without having major construction?
Asked by capecodscrapper - Sun Jun 29 06:56:52 2008 - - 5 Answers - 0 Comments
A. I have been building for over 25 yrs and only insulate between floors when noise reduction is desired. If heat loss to the second floor is a problem for you try closing off the second floor. Perhaps install a door at the foot of the stairs and keep it closed when you want the first floor warmer. Good luck :)
Answered by Sawman - Sun Jun 29 09:42:55 2008
Q. I have recently found out that there is no insulation between our first and second floors in my house. Upstairs is always pretty warm but we didn't find out until we heard mice scurrying and had the exterminator in and he told us the area wasn't insulated. With the winter coming, and having oil heat I would like to keep some of the heat on the first floor. Is there any way to insulate without having major construction?
Asked by capecodscrapper - Sun Jun 29 06:56:52 2008 - - 5 Answers - 0 Comments
A. I have been building for over 25 yrs and only insulate between floors when noise reduction is desired. If heat loss to the second floor is a problem for you try closing off the second floor. Perhaps install a door at the foot of the stairs and keep it closed when you want the first floor warmer. Good luck :)
Answered by Sawman - Sun Jun 29 09:42:55 2008
What's the best way (return on investment) to insulate a post-war storey and a half house?
Q. Double-brick construction (no insulation in the walls), sloped walls on second floor (i.e. no attic to insulate, hence the 1/2 storey). Built 1952, does have minimal insulation in-between the sloped walls and the roof. Basement is dry, uninsulated concrete block construction. Looking for retrofit solutions, like cladding the exterior in styrofoam and stucco, filling the small airspace between the double-brick walls with foam. Replacing the minimal roof insulation with some new super-insulating product (a thinsulate for houses, if such a thing exists). Have already replaced all the bad windows with double-glazed units, and foamed and caulked everything I can find, which has eliminated noticable drafts.
Asked by Noah - Sun Jun 3 12:25:15 2007 - - 1 Answers - 0 Comments
A. You might contact someone who builds homes and ask them to give advice for such a project. They keep up on all of the latest materials and know how...you don't have to hire them. There might be a committee in your area for restoration of older homes. They have connections. Be cautioned for the insulation drawing moisture and creating mold on down the road. Concrete and bricks draw lots of moisture and hold it since they are porus unless sealed.
Answered by donna D - Sun Jun 3 12:38:34 2007
Q. Double-brick construction (no insulation in the walls), sloped walls on second floor (i.e. no attic to insulate, hence the 1/2 storey). Built 1952, does have minimal insulation in-between the sloped walls and the roof. Basement is dry, uninsulated concrete block construction. Looking for retrofit solutions, like cladding the exterior in styrofoam and stucco, filling the small airspace between the double-brick walls with foam. Replacing the minimal roof insulation with some new super-insulating product (a thinsulate for houses, if such a thing exists). Have already replaced all the bad windows with double-glazed units, and foamed and caulked everything I can find, which has eliminated noticable drafts.
Asked by Noah - Sun Jun 3 12:25:15 2007 - - 1 Answers - 0 Comments
A. You might contact someone who builds homes and ask them to give advice for such a project. They keep up on all of the latest materials and know how...you don't have to hire them. There might be a committee in your area for restoration of older homes. They have connections. Be cautioned for the insulation drawing moisture and creating mold on down the road. Concrete and bricks draw lots of moisture and hold it since they are porus unless sealed.
Answered by donna D - Sun Jun 3 12:38:34 2007
What's the best way to insulate regular house windows?
Q. Not double glazed or anything: very old house with old school windows. Need to insulate them for the winter - what's the best way to easily do this? Thanks.
Asked by johnd1215 - Wed Nov 29 14:43:29 2006 - - 3 Answers - 0 Comments
A. New windows are quite expensive and take and it could take a long time for the energy cost savings to pay for them. The window film already mentioned does a pretty good job of both sealing air infiltration and adding another air film that will insulate the window and create a warmer surface. If you merely wanted to reduce air infiltration, you can buy clear "zip-away" caulk and apply around the window anywhere air can enter. In the spring, you simply pull it off. It seals well and will not peel off paint when removed (unless it's already peeling).
Answered by RJS - Wed Nov 29 15:37:04 2006
Q. Not double glazed or anything: very old house with old school windows. Need to insulate them for the winter - what's the best way to easily do this? Thanks.
Asked by johnd1215 - Wed Nov 29 14:43:29 2006 - - 3 Answers - 0 Comments
A. New windows are quite expensive and take and it could take a long time for the energy cost savings to pay for them. The window film already mentioned does a pretty good job of both sealing air infiltration and adding another air film that will insulate the window and create a warmer surface. If you merely wanted to reduce air infiltration, you can buy clear "zip-away" caulk and apply around the window anywhere air can enter. In the spring, you simply pull it off. It seals well and will not peel off paint when removed (unless it's already peeling).
Answered by RJS - Wed Nov 29 15:37:04 2006
In a two story house, how to insulate between upstairs and downstairs bedrooms?
Q. In a bi-level house, there are two bedrooms, one directly under the other. There is a heat vent in the floor upstairs and ceiling downstairs. How can you insulate/sound proof between these two bedrooms?
Asked by griffinthecat - Sun May 11 17:01:11 2008 - - 6 Answers - 0 Comments
A. Certainly as suggested the air vents will carry some of the sound, and they should not be compromised. Blown in will not work, most especially not shredded news paper. Carpeting above would help, with padding, but that's likely already installed? I guess I'd have to ask how much noise from above, who is creating the noise, why, and maybe switch bedrooms. There are other methods that would require changing the lower ceiling, as in acoustical tile, and/or drilling numerous holes in the lower ceiling and use aerosol foam insulator, in a low expansion formulation, but that too would require repairing the ceiling after the fact. In your case there may not be a totally satisfactory answer, and with no offense meant "I" would… [cont.]
Answered by DIY Doc - Sun May 11 20:36:54 2008
Q. In a bi-level house, there are two bedrooms, one directly under the other. There is a heat vent in the floor upstairs and ceiling downstairs. How can you insulate/sound proof between these two bedrooms?
Asked by griffinthecat - Sun May 11 17:01:11 2008 - - 6 Answers - 0 Comments
A. Certainly as suggested the air vents will carry some of the sound, and they should not be compromised. Blown in will not work, most especially not shredded news paper. Carpeting above would help, with padding, but that's likely already installed? I guess I'd have to ask how much noise from above, who is creating the noise, why, and maybe switch bedrooms. There are other methods that would require changing the lower ceiling, as in acoustical tile, and/or drilling numerous holes in the lower ceiling and use aerosol foam insulator, in a low expansion formulation, but that too would require repairing the ceiling after the fact. In your case there may not be a totally satisfactory answer, and with no offense meant "I" would… [cont.]
Answered by DIY Doc - Sun May 11 20:36:54 2008
Can I insulate with foam sheathing under my mobile home?
Q. I want to use foam sheathing to insulate under my mobile home. I would be putting it over the existing insulation blanket already in place. How can I attach it and is this a good idea ? Would it cause condensation to form anywhere ?
Asked by kawal - Thu Apr 2 16:07:43 2009 - - 2 Answers - 0 Comments
A. it would be difficult to insulate with the rigid sheeting. the duct work and plumbing are run beneath the floor joists. condensation will form between the two as well. a better solution is to use "frost blankets" to overlay the existing belly. Construction company's use these to keep concrete warm so it doesn't freeze in the fall and sometimes to take out a surface frost for pouring concrete in the same situation. They are flexible and don't contain materials that end up every where you dont want them when cut to place it. start at one end and tuck the blanket over the top of the metal cross members and under the existing belly. Some places it is really a tight squeeze. Staple it on one side along the frame leaving it long and then screw a… [cont.]
Answered by oreos40 - Sun Apr 5 13:12:11 2009
Q. I want to use foam sheathing to insulate under my mobile home. I would be putting it over the existing insulation blanket already in place. How can I attach it and is this a good idea ? Would it cause condensation to form anywhere ?
Asked by kawal - Thu Apr 2 16:07:43 2009 - - 2 Answers - 0 Comments
A. it would be difficult to insulate with the rigid sheeting. the duct work and plumbing are run beneath the floor joists. condensation will form between the two as well. a better solution is to use "frost blankets" to overlay the existing belly. Construction company's use these to keep concrete warm so it doesn't freeze in the fall and sometimes to take out a surface frost for pouring concrete in the same situation. They are flexible and don't contain materials that end up every where you dont want them when cut to place it. start at one end and tuck the blanket over the top of the metal cross members and under the existing belly. Some places it is really a tight squeeze. Staple it on one side along the frame leaving it long and then screw a… [cont.]
Answered by oreos40 - Sun Apr 5 13:12:11 2009
How do I insulate my room from snoring roommate?
Q. My roommate snores, and I hear him more than I would like. How can I insulate our shared wall so I will hear him less?
Asked by Eric F - Tue Apr 7 11:37:00 2009 - - 5 Answers - 0 Comments
A. LOL a hammer !!
Answered by Steve C - Tue Apr 7 12:31:58 2009
Q. My roommate snores, and I hear him more than I would like. How can I insulate our shared wall so I will hear him less?
Asked by Eric F - Tue Apr 7 11:37:00 2009 - - 5 Answers - 0 Comments
A. LOL a hammer !!
Answered by Steve C - Tue Apr 7 12:31:58 2009
How do you insulate the crawl space of a home ?
Q. I have two rooms in my house that gets drafty when it is cold outside . The air is coming from the crawlspace and into the house . Any tips on how to insulate that area and eliminate the cold ?
Asked by jeffadelic - Tue Dec 1 11:26:29 2009 - - 4 Answers - 0 Comments
A. First find out where the wind is coming in through the foundation. If you have foundation vents - close all so they close tight. Make sure your crawl space access door is shut tight. Block up any holes in the foundation itself. Fiberglass insulation does not work well in a crawl space - mice and rodents like to bore holes in it to nest. I suggest purchasing 4'x8' x 2" thick pcs. of Dow Styrofoam (blue). Cut in long strips and place up against the inside of the foundation wall. The perimeter of your foundation is where most heat is lost, the floor of your main house does not loose much heat as heat rises. Also if your duct work for your furnace is in the crawl space - it will provide some radiant heat off of the duct work. This is why I do… [cont.]
Answered by Tedruski - Tue Dec 1 11:40:04 2009
Q. I have two rooms in my house that gets drafty when it is cold outside . The air is coming from the crawlspace and into the house . Any tips on how to insulate that area and eliminate the cold ?
Asked by jeffadelic - Tue Dec 1 11:26:29 2009 - - 4 Answers - 0 Comments
A. First find out where the wind is coming in through the foundation. If you have foundation vents - close all so they close tight. Make sure your crawl space access door is shut tight. Block up any holes in the foundation itself. Fiberglass insulation does not work well in a crawl space - mice and rodents like to bore holes in it to nest. I suggest purchasing 4'x8' x 2" thick pcs. of Dow Styrofoam (blue). Cut in long strips and place up against the inside of the foundation wall. The perimeter of your foundation is where most heat is lost, the floor of your main house does not loose much heat as heat rises. Also if your duct work for your furnace is in the crawl space - it will provide some radiant heat off of the duct work. This is why I do… [cont.]
Answered by Tedruski - Tue Dec 1 11:40:04 2009
How do I insulate my attic? Do I need ventilation where the walls are angled, directly against the roof?
Q. I did not finish my 3rd floor when I built my house 12 years ago. Now I want to finish it and the next step is insulation. I have my heat pump installed and am ready to insulate but can't find any guidance. I don't know what insulation to buy and what I do for the angled walls directly against the roof. Where would I find these answers?
Asked by Marenda - Wed Jun 27 15:38:53 2007 - - 6 Answers - 0 Comments
A. For the rafters use fiberglass batt insulation which you can get at a HomeDepot. Im not sure what a heat pump is, but if it is a sheet metal duct, use fiberglass board insulation and attach it by pinning it up with stick pins (pins that stick to the duct and then you push the board onto the pins. You can buy the board insulation and pins online at www.buyinsulationproducts .com. Hope this helps
Answered by expertinsulationman - Thu Jun 28 12:49:02 2007
Q. I did not finish my 3rd floor when I built my house 12 years ago. Now I want to finish it and the next step is insulation. I have my heat pump installed and am ready to insulate but can't find any guidance. I don't know what insulation to buy and what I do for the angled walls directly against the roof. Where would I find these answers?
Asked by Marenda - Wed Jun 27 15:38:53 2007 - - 6 Answers - 0 Comments
A. For the rafters use fiberglass batt insulation which you can get at a HomeDepot. Im not sure what a heat pump is, but if it is a sheet metal duct, use fiberglass board insulation and attach it by pinning it up with stick pins (pins that stick to the duct and then you push the board onto the pins. You can buy the board insulation and pins online at www.buyinsulationproducts .com. Hope this helps
Answered by expertinsulationman - Thu Jun 28 12:49:02 2007
What is the material that is used to insulate the jackets worn in cold countries?
Q. Sometimes I see jackets that say 60% insulated and 40% duck. I was wondering what is "insulated" in the above context. Or what do they insulate it with? Please help. Thank you
Asked by chikukv - Tue Nov 13 15:39:47 2007 - - 4 Answers - 0 Comments
A. Thinsulate?
Answered by Vic - Tue Nov 13 15:46:54 2007
Q. Sometimes I see jackets that say 60% insulated and 40% duck. I was wondering what is "insulated" in the above context. Or what do they insulate it with? Please help. Thank you
Asked by chikukv - Tue Nov 13 15:39:47 2007 - - 4 Answers - 0 Comments
A. Thinsulate?
Answered by Vic - Tue Nov 13 15:46:54 2007
How do you insulate a hollow interior door?
Q. Ok, so my shed has an interior door, but I work there sometimes, and it's friggin' cold. I found out that the door there is a hollow interior door, and I don't want to spend 200 bucks in a new door. Is there a way to insulate the door with something that won't get it on fire? I would put door insulation in it, but I know that it's flammable. Any ideas? I would particularly love to use some recycled material... 10 points for the best answer!
Asked by Don Manolo - Sun Jan 4 15:12:09 2009 - - 6 Answers - 0 Comments
A. The door itself is flamable. and maybe the building. Drill a few holes at different levels in the door. buy a expanding poly type foam.
Answered by ^glen^magnific^ ^mufflerdent^ - Sun Jan 4 15:18:56 2009
Q. Ok, so my shed has an interior door, but I work there sometimes, and it's friggin' cold. I found out that the door there is a hollow interior door, and I don't want to spend 200 bucks in a new door. Is there a way to insulate the door with something that won't get it on fire? I would put door insulation in it, but I know that it's flammable. Any ideas? I would particularly love to use some recycled material... 10 points for the best answer!
Asked by Don Manolo - Sun Jan 4 15:12:09 2009 - - 6 Answers - 0 Comments
A. The door itself is flamable. and maybe the building. Drill a few holes at different levels in the door. buy a expanding poly type foam.
Answered by ^glen^magnific^ ^mufflerdent^ - Sun Jan 4 15:18:56 2009
From Yahoo Answer Search: 'insulate'
Fri Mar 12 08:31:26 2010 [ refresh local cache ]
[Hide]▼
nvdaily.com
Northern Virginia Daily, VA
Unlike Allegheny, which buys all of its power on the open market, both co-ops have ownership stakes in generators that help insulate them from big swings in the cost of power. Spikes in the wholesale power market at one point had Allegheny on track to ...
identi.ca
Floyd
hu, 01 Oct 2009 03:16:41 GM
House . Insulation. - What Do You . Insulate. First With Your Limited Budget?*
[Hide]▲
